|
| Notice - Specifications are subject to change without notice |
SG-3000 Receiver unit |
Description / Specifications |
Units |
| Battery Voltage |
4.8 Vdc (4x "AA" @ 1.2 Volt per cell) |
| Capacity |
2100 ma/H |
| Battery Life (estimate) |
3 - 5 Hours |
| External Charger wall transformer |
120 VAC Input
9 VDC Output |
| Average Charge Time (Microprocessor controlled) |
Rate C/3 700 ma |
|
| Pressure sensor (LOW Side) |
Range 0-29.9 mm/hg
0-500 psig
Accuracy <1% @ FS
Pressure overload 1000 psig
Burst pressure 2000 psig |
| Pressure sensor (HIGH Side) |
Range 0-1000 psig
Accuracy <1% @ FS
Pressure overload 1500 psig
Burst pressure 2000 psig |
| External Temp Sensors |
Range 0-150 deg/F
Accuracy 1% @ FS |
| Internal LCD Display |
4x20 line/chr's |
| 900 mhz Radio Receiver unit |
Complies FCC part 15
( default ) Factory set (see Units Label) CH 0 903.37 mhz
Factory set (see Units Label) CH 1 906.37 mhz
Factory set (see Units Label) CH 2 907.37 mhz
Factory set (see Units Label) CH 3 909.37 mhz
Factory set (see Units Label) CH 4 912.37 mhz
Factory set (see Units Label) CH 5 915.37 mhz
Factory set (see Units Label) CH 6 919.87 mhz
Factory set (see Units Label) CH 7 921.37 mhz |
SG-3000
Transmitter unit |
| Battery Voltage |
9 Vdc (1x "9V" Alkaline) |
| Capacity |
525 ma/H |
| Battery Life (estimate) |
1 - 2 hours |
| External HTM-2500 RH / Temp Probe |
Range 0 - 100 %RH
Max operating range 115 deg/F
RH Accuracy (10-95%RH) +/- 3 %RH
Response time (33-76%RH) 3-5 sec
Internal Temp sensor range 0-150 deg/F |
| External Temp Sensors |
Range 0-150 deg/F
Accuracy 1% @ FS |
| 900 mhz Radio Transmitter unit |
Complies FCC part 15
( default ) Factory set (see Units Label) CH 0 903.37 mhz
Factory set (see Units Label) CH 1 906.37 mhz
Factory set (see Units Label) CH 2 907.37 mhz
Factory set (see Units Label) CH 3 909.37 mhz
Factory set (see Units Label) CH 4 912.37 mhz
Factory set (see Units Label) CH 5 915.37 mhz
Factory set (see Units Label) CH 6 919.87 mhz
Factory set (see Units Label) CH 7 921.37 mhz |